Model | FD850 |
Max Paper Width | 850mm |
Cutting Precision | ±0.20mm |
Paper Gram Weight | 150-350g/㎡ |
Production Capacity | 280-320times/min |
Air Pressure Requirement | 0.5Mpa |
Air Pressure Consumption | 0.25m³/min |
Weight | 3.5T |
Max Roller Diameter | 1500 |
Total Power | 20KW |
Dimension | 5500x1700x1800mm |
Characteristics:
1) Adopt the anilox roller to spread ink.
2) Unwinding tension is controlled by automatic tension controller from Japan Mitsubishi.
3) Each printing unit adopt 360°for registration.
4) Each printing unit have one IR dryer
5) The rubber roller can break away automatically while parking, and run at a low speed in order to avoid ink being dry.
6) The main motor is adopted the import stepless regulation of frequency conversion.
7) Unwinding, web guiding, printing, IR drying and punching can be finished in one process
Web width | 860mm |
Print width | 850mm |
Unwind Diameter max | 1200mm |
Press Speed max (Production speed depending on process, job etc.) | 80m/min |
Gear Pitch | 1/8” (3.175mm) |
Flexo Print Units (IR dryer): | 2 |
Min.Max repeat Print Cylinder | 10” - 22.5” |
Web Guiding: number | 1 |
Overprint precision | ±0.15mm |
Machine weight | 6000kg |
Voltage | 3 phase 380V, 50HZ Please kindly inform us if different |
Diameter of air shafts | 76mm Please kindly inform us if different |
Diameter of printing plate | 1.7mm Please kindly inform us if different |
Diameter of plate mounting tape | 0.38mm Please kindly inform us if different |
The size of printing cylinder and ceramic anilox roller also need to inform us. |